lemon-student-13425
08/21/2024, 4:51 PMchilly-king-10285
08/21/2024, 4:51 PMchilly-king-10285
08/21/2024, 4:51 PMbash bash <(curl <https://raw.githubusercontent.com/ory/meta/master/install.sh>) -d -b . ory <version-you-want> ./ory help
2. You may want to move the Ory CLI to your $PATH
to make it easily accessible: bash sudo mv ./ory /usr/local/bin/ ory help
Please replace <version-you-want>
with the specific version of Ory CLI you want to install. After the installation, you can create your first project: bash ory create project --name "Documentation example"
Once the project is created, you have access to Ory's APIs. For more detailed instructions, you can refer to the [official Ory documentation](https://www.ory.sh/docs/getting-started/local-development). Please note that the APIs of Ory open-source Servers don't come with integrated access control. This means that all requests sent to their APIs are considered authenticated, authorized, and will be executed. Leaving the APIs in this state can lead to severe security risks. When deploying Ory open-source Servers, protect access to their APIs using [Ory Oathkeeper](https://github.com/ory/oathkeeper) or a comparable API Gateway. If you need help, reach out to the community on [Ory Community Slack](http://slack.ory.sh/).lemon-student-13425
08/21/2024, 4:52 PMlemon-student-13425
08/21/2024, 4:52 PMchilly-king-10285
08/21/2024, 4:52 PMchilly-king-10285
08/21/2024, 4:53 PMconfig.yaml
or any name you prefer. 2. Open the file and set your configuration. The configuration options will depend on the specific Ory project you're working on. For example, if you're working with Ory Hydra, your configuration might look like this: yaml oauth2: urls: consent: <http://localhost:3000/consent> error: /oauth2/fallbacks/error login: <http://localhost:3000/login> post_logout_redirect: /oauth2/fallbacks/logout
3. Save the file. 4. Use the Ory CLI to apply the configuration to your project. For example, if you're updating the OAuth2 configuration for a project, you would use the following command: bash ory update oauth2-config --project <project-id> --workspace <workspace-id> --file config.yaml
Replace <project-id>
and <workspace-id>
with your actual project and workspace IDs. For more specific configuration options, you can refer to the official Ory documentation for each project: - [Ory Hydra Configuration](https://www.ory.sh/docs/hydra/reference/configuration) - [Ory Keto Configuration](https://www.ory.sh/docs/keto/reference/configuration) - [Ory Oathkeeper Configuration](https://www.ory.sh/docs/oathkeeper/configure-deploy#configure) - [Ory Kratos Configuration](https://www.ory.sh/docs/kratos/self-service/flows/verify-email-account-activation#configuration)lemon-student-13425
08/21/2024, 4:53 PMchilly-king-10285
08/21/2024, 4:53 PMchilly-king-10285
08/21/2024, 4:54 PMbash useradd -s /bin/false -m -d /opt/kratos kratos
2. Create folders to hold the installation data and configuration files: bash mkdir /opt/kratos/{bin,config}
3. Install Ory Kratos: bash cd /opt/kratos/bin # Download a new version of Ory Kratos wget <https://github.com/ory/kratos/releases/download/<version-you-want>/kratos_<version-you-want>-linux_64bit.tar.gz> # Extract contents tar xfvz kratos_<version-you-want>-linux_64bit.tar.gz # Remove redundant files rm *md rm LICENSE
4. Download the Quickstart configuration files: bash cd ../config wget <https://raw.githubusercontent.com/ory/kratos/<version-you-want>/contrib/quickstart/kratos/email-password/identity.schema.json> wget <https://raw.githubusercontent.com/ory/kratos/<version-you-want>/contrib/quickstart/kratos/email-password/kratos.yml>
5. Add configuration for Ory Kratos in kratos.yml
to use the Postgres database. Open kratos.yml
and change the dsn configuration. By default dsn: memory
is configured, so Ory Kratos is storing data in the temporary memory. Change the DSN key to use the Postgres database you configured before: bash - dsn: memory + dsn: <postgres://kratos:[email> protected]:5432/kratos?sslmode=disable&max_conns=20&max_idle_conns=4
6. Change the default location of the identity schema: bash identity: default_schema_id: default schemas: - id: default - url: file:///etc/kratos/config/identity.schema.json + url: file:///opt/kratos/config/identity.schema.json
7. Apply migrations: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml migrate sql -y <postgres://kratos:[email> protected]:5432/kratos?sslmode=disable
8. Test your setup using the serve
command: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml serve
Please replace <version-you-want>
with the specific version of Ory Kratos you want to install. For more detailed instructions, you can refer to the [official Ory Kratos documentation](https://www.ory.sh/docs/kratos/guides/deploy-kratos-example#install-ory-kratos).lemon-student-13425
08/21/2024, 4:55 PMchilly-king-10285
08/21/2024, 4:55 PMchilly-king-10285
08/21/2024, 4:55 PMbash bash <(curl <https://raw.githubusercontent.com/ory/meta/master/install.sh>) -d -b . kratos <version-you-want> ./kratos help
2. You may want to move Ory Kratos to your `$PATH`: bash sudo mv ./kratos /usr/local/bin/ kratos help
Please replace <version-you-want>
with the specific version of Ory Kratos you want to install. After the installation, you can create a new user and folders to hold the installation data and configuration files: bash useradd -s /bin/false -m -d /opt/kratos kratos mkdir /opt/kratos/{bin,config}
Then, download a new version of Ory Kratos, extract its contents, and remove redundant files: bash cd /opt/kratos/bin wget <https://github.com/ory/kratos/releases/download/<version-you-want>/kratos_<version-you-want>-linux_64bit.tar.gz> tar xfvz kratos_<version-you-want>-linux_64bit.tar.gz rm *md rm LICENSE
Next, download the Quickstart configuration files: bash cd ../config wget <https://raw.githubusercontent.com/ory/kratos/<version-you-want>/contrib/quickstart/kratos/email-password/identity.schema.json> wget <https://raw.githubusercontent.com/ory/kratos/<version-you-want>/contrib/quickstart/kratos/email-password/kratos.yml>
You can then configure Ory Kratos to use a Postgres database and change the default location of the identity schema. After that, apply migrations: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml migrate sql -y <postgres://kratos:[email> protected]:5432/kratos?sslmode=disable
Finally, test your setup using the serve
command: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml serve
For more detailed instructions, you can refer to the [official Ory Kratos documentation](https://www.ory.sh/docs/kratos/guides/deploy-kratos-example#install-ory-kratos).lemon-student-13425
08/21/2024, 5:00 PMchilly-king-10285
08/21/2024, 5:00 PMchilly-king-10285
08/21/2024, 5:00 PMbash bash <(curl <https://raw.githubusercontent.com/ory/meta/master/install.sh>) -d -b . kratos v1.2 ./kratos help
2. You may want to move Ory Kratos to your `$PATH`: bash sudo mv ./kratos /usr/local/bin/ kratos help
After the installation, you can create a new user and folders to hold the installation data and configuration files: bash useradd -s /bin/false -m -d /opt/kratos kratos mkdir /opt/kratos/{{bin,config}}
Then, download version 1.2 of Ory Kratos, extract its contents, and remove redundant files: bash cd /opt/kratos/bin wget <https://github.com/ory/kratos/releases/download/v1.2/kratos_v1.2-linux_64bit.tar.gz> tar xfvz kratos_v1.2-linux_64bit.tar.gz rm *md rm LICENSE
Next, download the Quickstart configuration files: bash cd ../config wget <https://raw.githubusercontent.com/ory/kratos/v1.2/contrib/quickstart/kratos/email-password/identity.schema.json> wget <https://raw.githubusercontent.com/ory/kratos/v1.2/contrib/quickstart/kratos/email-password/kratos.yml>
You can then configure Ory Kratos to use a Postgres database and change the default location of the identity schema. After that, apply migrations: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml migrate sql -y <postgres://kratos:[email> protected]:5432/kratos?sslmode=disable
Finally, test your setup using the serve
command: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml serve
For more detailed instructions, you can refer to the [official Ory Kratos documentation](https://www.ory.sh/docs/kratos/guides/deploy-kratos-example#install-ory-kratos).lemon-student-13425
08/21/2024, 5:03 PMchilly-king-10285
08/21/2024, 5:03 PMchilly-king-10285
08/21/2024, 5:03 PMlemon-student-13425
08/21/2024, 5:04 PMchilly-king-10285
08/21/2024, 5:04 PMchilly-king-10285
08/21/2024, 5:04 PMbash docker pull oryd/kratos:latest
2. Run the Docker image: bash docker run --rm -it oryd/kratos:latest help
After the installation, you can create a new user and folders to hold the installation data and configuration files: bash useradd -s /bin/false -m -d /opt/kratos kratos mkdir /opt/kratos/{bin,config}
Then, download the latest version of Ory Kratos, extract its contents, and remove redundant files: bash cd /opt/kratos/bin wget <https://github.com/ory/kratos/releases/latest/download/kratos-linux_64bit.tar.gz> tar xfvz kratos-linux_64bit.tar.gz rm *md rm LICENSE
Next, download the Quickstart configuration files: bash cd ../config wget <https://raw.githubusercontent.com/ory/kratos/master/contrib/quickstart/kratos/email-password/identity.schema.json> wget <https://raw.githubusercontent.com/ory/kratos/master/contrib/quickstart/kratos/email-password/kratos.yml>
You can then configure Ory Kratos to use a Postgres database and change the default location of the identity schema. After that, apply migrations: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml migrate sql -y <postgres://kratos:[email> protected]:5432/kratos?sslmode=disable
Finally, test your setup using the serve
command: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml serve
For more detailed instructions, you can refer to the [official Ory Kratos documentation](https://www.ory.sh/docs/kratos/guides/deploy-kratos-example#install-ory-kratos).lemon-student-13425
08/21/2024, 5:17 PMchilly-king-10285
08/21/2024, 5:17 PMchilly-king-10285
08/21/2024, 5:18 PMmigrate sql
command provided by Ory Kratos. Here's an example: bash /opt/kratos/bin/kratos -c /opt/kratos/config/kratos.yml migrate sql -e memory
This command will apply the necessary SQL migrations to the in-memory database. Please note that data stored in an in-memory database is ephemeral and will be removed when the service is killed. Therefore, this setup is typically used for testing or development purposes. For more information, you can refer to the [official Ory documentation](https://www.ory.sh/docs/kratos/guides/deploy-kratos-example#install-ory-kratos).